Purpose:

The MSH 5000/85 soil pump is designed for pumping highly abrasive hydraulic mixtures with pH from 6 to 12, density up to 1600 kg / m3, temperature from 278 to 333 K (from 5 ° to 60 ° C), volumetric concentration of solids up to 40% , microhardness up to 11000 MPa. Use the soil pump MSh 5000/85 should be used for pumping hydraulic mixtures with solid particles up to 40 mm.
The soil pump MSH 5000/85 is used in any industry where it is necessary to provide hydrotransport of solid particles, causing intense abrasive wear of the material in contact with them. Taking into account the requirements for the MSH 5000/85 soil pump for wear resistance and operating conditions, the plant makes them with a flow part from superhard alloys.

Scope of the pump MSH 5000/85:

mining and processing and mining and metallurgical
enterprises; thermal power plants
cement enterprises
diamond and gold mining enterprises
technological lines for crushing and mineral processing, etc.

Main technical characteristics, soil pump MSH 5000/85:

productivity - 5000 cubic meters / hour
head - 85 meters
motor parameters - 1600 kW 500 rpm
allowable cavitation reserve - 4.8 m
impeller diameter - 1390 mm
weight of the pump - 15 350 kg

The list of spare parts, soil pump MSH 5000/85:

Impeller, soil pump MSh 5000/85, drawing No. 346.01.02.010СБ, material - high-chrome cast iron
The case is internal, the soil pump MSh 5000/85, drawing No. 346.01.00.009, material - high-chrome cast iron
The disk is protective, the soil pump MSh 5000/85, drawing No. 346.01.00.003, material - high-chrome cast iron
Suction nozzle, soil pump MSh 5000/85, drawing No. 346.01.00.002, material - high-chrome cast iron

The company LLC “PGMK” in 2010 began to produce its own pumps of the type MSH PGMK, which can solve the following issues: The growth of the main technical characteristics of the pump: - productivity of at least 12,000 m3 / hour; - head N (m) not less than 80m. The increase in the main indicators of the pump is due to: a decrease in losses due to a reduction in internal flows, a decrease in the gaps between the impeller and the armor plates, as well as an increase in the diameter of the impeller, structural changes in the parts of the flow part, shaft reinforcement and other “know how”. The introduced changes in the design of the pump and the impeller are patented novelty and are protected by a patent of the Russian Federation. The MSH PGMK pump, as can be seen from the table, is superior to imported samples in terms of basic technical characteristics, and is also approximately comparable in cost to domestic samples. At the moment, the MSH PGMK pump, by its characteristics, occupies the best position in the price / quality ratio.
This pump was delivered and successfully operates at the largest mining and processing plants in Russia, Ukraine, Uzbekistan and Kazakhstan. The company "PGMK" offers you the installation of a new pump MSH PGMK 13000/85, as well as the supply of spare parts for this pump.

At the moment, PGMK LLC has mastered the production of Warman complete pump analogues that are not inferior in characteristics to the original ones:

Warman 650. Productivity is up to 10000 m3 / h, a pressure of 55 meters. Guaranteed trouble-free operation of 3000 moto hours.

Warman 14/12. Productivity is up to 3000 m3 / h, a pressure of 73 meters. 4,000-hour trouble-free operation guarantee

Purpose: Warman pump analogs are designed for pumping highly abrasive hydraulic mixtures with pH from 6 to 12, density up to 2200 kg / m3, temperature from 278 to 343 K (from 5 to 70 ° C), volumetric concentration of solids up to 40%, maximum size of solids particles of 12 mm, microhardness up to 11000 MPa. Slurry pumps of the BP type, analogues of Warman pumps, are used in any industry where it is necessary to ensure the hydrotransport of solid particles, causing intense abrasive wear of the material in contact with them. Taking into account the requirements for these soil pumps in terms of wear resistance and operating conditions, the plant manufactures them with a flow part from the wear-resistant alloy high-chrome cast iron. Scope of Warman slurry pumps: mining and processing and mining and metallurgical enterprises, thermal power plants, cement manufacturing enterprises, diamond and gold mining enterprises, crushing, mineral processing and other processing lines.

List of wearing parts:
The disk which is soaking up, material - high-chrome cast iron
Impeller, material - high-chrome cast iron
The case is internal, material - high-chrome cast iron
Rear disc, material - high-chrome cast iron

At the moment, PGMK LLC has mastered the production of analogues of Metso complete pumps that are not inferior in characteristics to the original ones:

Metso L36. Productivity is up to 2000 m3 / h, a pressure of 70 meters. Guaranteed trouble-free operation of 3000 moto hours.

Metso MA54. Productivity is up to 5000 m3 / h, a pressure of 85 meters. Guaranteed trouble-free operation of 4000 moto-hours.

Appointment: analogues of Metso pumps are designed for pumping highly abrasive hydraulic mixtures with pH from 6 to 12, density up to 2200 kg / m3, temperature from 278 to 343 K (from 5 to 70 ° C), volumetric concentration of solids up to 40%, maximum size of solids particles of 12 mm, microhardness up to 11000 MPa.

BP slurry pumps, analogues of Metso pumps, are used in any industry where it is necessary to ensure the hydrotransport of solid particles, causing intense abrasive wear of the material in contact with them. Taking into account the requirements for these soil pumps in terms of wear resistance and operating conditions, the plant manufactures them with a flow part from the wear-resistant alloy IChKh28N2. Scope of Metso slurry pumps: mining and processing enterprises, mining and metallurgical enterprises, thermal power plants, cement manufacturing enterprises, diamond and gold mining enterprises, crushing and mineral processing lines, etc.

List of wearing parts:
The disk which is soaking up, material - high-chrome cast iron
Impeller, material - high-chrome cast iron
The case is internal, material - high-chrome cast iron
Rear disc, material - high-chrome cast iron